Installation Manual

OBID i-scan

Installation ID ISC.ANT1300/680-A

FEIG ELECTRONIC GmbH Page 16 of 50 M71104-1e-ID-B.doc

4.2.2 Contents of the Gate- Integration- Kit ID ISC.ANT.GIK

The following parts are contents of the Gate- Integration- Kit .

Position Qty. Name / Use

1. 1 DC- cable relay / Connection Buzzer – Relay Output – 24V

2. 2 DC-cable Reader, PS, Mux / DC-Connection to Terminal block – Reader, PS or Mux

3. 1 3,65m coaxial cable/ HF- Connection Reader – Mux (just at the use of Mux)

4. 1 1,35m coaxial cable / HF- Connection Reader – PS or Mux

5. 4 Cable tie 4,8x280mm / tie together of the coaxial cables

6. 3 Cable tie 2,5x105mm / Mounting of the torrid cores of the DC-cables and the relay

7. 1 SMA adapter female-female / Connection of 1,35m with 3,65m coaxial cable with Mux

8. 1 Terminal block 5x 2pin / Connection DC - cables

9. 2 Bridge of Terminal block / Connection of the terminals GND and 24VDC

10. 2 Screw M3x10 / Mounting Terminal block into the antenna foot

11. 4 Hexagon spacer bolt M3x6 / Mounting PS or Multiplexer into the antenna foot

12. 4 Screw M3x6 / Mounting PS or Multiplexer into the antenna foot

13. 3 Screw M4x8 / Mounting Reader into the antenna foot

10.

11.

12.

13.