User's Manual

3
4
within 3 Minutes of turning the fans
AC power on.
the lowest Speed setting. The fan will continue
to spin until the "STOP" button has been pressed.
The DC motor has a built in
safety against obstruction during operation, if the
fan motor senses a obstruction it will get locked
and will not rotate until the power has been
disconnected for 10 seconds.
The "D" that appears on the back of the remote
control next to the frequency dip switches is used
when using CFL bulbs only. Leaving the dip switch
in the "D" setting will allow for dimming capability.
In the "ON" position it will disable the Dimming
function.