User's Manual

SYMPTOM
Frequency interferenc
e
SO
LUTION
1.Turn the power off to your ceiling fan.
2.Please use a small size tool to change the frequency setting on the control system.
3.Return power to the unit Note: After the AC power is on,do not press any othe
r
button on the transmitter before pressing the “Stop” button, doing so will cause the
procedure to fail.
4.Within 60 seconds of turning the Fan’s AC power ON.Press the transmitter’s Stop
”
button for 10 seconds.
5.Once the receiver has detected the set frequency, the down light of your fan i
f
applicable will blink twice. (there is no indication if your fan is not equipped wit
h
a light).
6.The receiver has now learn the frequency which has been selected on the transmitter
.
After completing the steps above, you should be able to operate the ceiling fan an
d
light. If the fan is not responding to the transmitter, please turn the power off t
o
the receiver, and repeat the process.