GALILEO ™ digital heater MODEL BH3930 Read instructions before operating. Retain for future reference. Instruction Leaflet ☎ INFO-LINE If after having read this leaflet, you have any questions or comments on your heater, call 1-800-253-2764 in North America.
HEATER SAFETY PLEASE READ AND SAVE THESE IMPORTANT SAFEGUARDS. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using the appliance. 2. To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet. 3. The heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces.
10. Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by Bionaire® may cause hazards. over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the heater.
ASSEMBLY INSTRUCTIONS Wheel Assembly Figure 2 Tools required for assembly: Phillips head screwdriver Carefully unpack your Bionaire® heater from the box (it is recommended to save the box for off-season storage). You will find the following pieces: 1. Four casters (wheels) 2. Four screws mode 3. Two caster (wheel platforms) WARNING DO NOT ATTEMPT TO OPERATE THE HEATER WITHOUT THE WHEELS IN PLACE 1. Make sure the unit is unplugged.
2. Press Mode button on remote a second time. The remote screen will now display "High" (1500 Watts). The unit’s "High" light will illuminate and the unit will run in this mode. In this mode the unit will continuously run at 1500 Watts. Note: While using the remote, the backlight function will turn on when any button is pushed and will turn off after 10 seconds of non-use. Note: Do not cover remote while in use, this may affect the accuracy of the temperature reading.
back to previous mode 4.1) "timer" remains lit to show the timer function has been set. 5) At any time if you unlock the remote and push the mode button to turn the unit off the timer setting will be erased and "timer" will disappear from the remote. To check how much time is remaining, press and hold the + and – buttons simultaneously. 5.1) To turn unit on while remote and unit are off (only ambient temp is displayed on remote). This function is meant for a person to preheat a room by setting the timer.
The Holmes Group, Inc. Consumer Service Department 32B Spur Drive El Paso, TX 79906 Canada 6385 Shawson Drive Mississaugua, Ontario Canada, L5T IS7 WARRANTY Operation under conditions other than those recommended or at voltages other than the voltage indicated on the unit, or any attempts by unauthorized personnel to service the unit or modify it, will render the guarantee void.
The Fego Precision Industrial Co., Ltd. Model: 3430TX;3930TX (referred to as the EUT in this report) is a wireless transmitter of Heater Fan Remote Control. A major technical descriptions of EUT is described as following: A). Fundamental Frequency: 315 MHz B). Modulation : Pulse Modulation C). Antenna Designation: Non-User Replaceable (Fixed) D). Power Supply: DC 4.5V, Battery Operated. E).
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition.(1).this device may not cause harmful interference. (2).this device must accept any interference received, including interference that may cause undesired operation Warning: Note: This equipment has been tested and found to comply with the limits for digital device, pursuant to Part 15 of FCC Rules.
