Data Sheet

TEL：[phone] FAX：[phone]
www.feetechrc.com www.feetechrc.com.cn
Page 3 of 3
Set Servo Mode
All LED at off status
a: Selected switch to “S”side
b: Long press the “P”key (> 5 second)
c: all LEDs will flash when program completed
d: Servo have set to work at Servo Mode
Test Servo
a: Press“S”key (one time)
b: Into auto sweep test mode, and“S” LED will quick flash
c: Press“S”key (tow time)
d: Into 3 point test mode, and“S” LED will slow flash
e: Press“L”key Servo will go to the LEFT side position
f: Press“P”key Servo will go to the MIDDLE position
g: Press“R”key Servo will go to the RIGHT side position
h: Press“S”key (three time)
i: Back to program mode, and all LED will off
Set Continuous Rotation Mode
All LED at off status
a: Selected switch to “C”side
b: Long press the “P”key (> 5 second)
c: all LEDs will flash when program completed
d: Servo have set to work at Continuous Rotation Mode
e: Test servo can stop at MIDDLE position, CCW at LEFT position and CW at RIGHT
position