Cut Sheet
2 4
FEATURES
• Availablein24VAC/DC
• Triorquad-colormodels
• Availableinchromeorwhitenish
• 50,000hourvibration-resistantLEDlamps
• Integratedsounder,60dBa@10',2selectabletones
• Surfacemount
• Indooruseonly
• PLCcompatible
MODEL DESCRIPTION VOLTAGE
OPERATING DECIBELS
MOUNTCURRENT 10' 1M
SCB-024TC Tri-color, white finish 24VAC/DC 150 mA* 60 70 Surface
SCB-024QC Quad-color, white finish 24VAC/DC 175 mA* 60 70 Surface
SCC-024TC Tri-color, chrome finish 24VAC/DC 150 mA* 60 70 Surface
SCC-024QC Quad-color, chrome finish 24VAC/DC 175 mA* 60 70 Surface
* Amp draw measured with all colors and sounder activated simultaneously.
Federal Signal’s SemiStat
®
Status Indicator is designed to meet the needs of the OEM market. The SemiStat is an
attractive, easy-to-install and economical status indicator.
ThesnaptABShousingcoverandastandardterminalblockmakeinstallationandwiringoftheSemiStataquickjob.
The attractive and durable ABS housing is available with either a white or chrome finish to complement the machine or
location of installation.
SemiStat LED light modules utilize extremely bright light emitting diodes for the greatest attention-getting effect. The Tri-
Color SemiStat features Red, Amber and Green light modules, and the Quad Color SemiStat features Red, Amber, Green
and Blue light modules. Clear LED light modules are available separately. The sequence of the LED light modules can be
easilychangedtosuittheapplication–justpopoffthehousingcover,disconnectthemodulesandreconnectinthe
desired order. Light modules can be set to flashing or steady burning mode.
For further utility, each SemiStat is equipped with an integrated piezo sounder. SemiStat sounders produce 60 dBa at ten
feet. A selection of two beep patterns is offered.
Models SCB and SCC
SemiStat
®
Status Indicator