Manual

FEC Micro NR Operations Manual Chapter 4: System Setup and Wiring (Rev2.1: 12/12)
Page 4-13
4.6 MNR Unit DIP Switch setting.
The MNR Unit has three DIP switches used for configuration setting. SW1, SW2 & SW3 are
located on the front of the MNR unit.
SW1 Orientation SW2 Orientation SW3 Orientation
(See below for setting) (Not Used – Set all OFF) (Not Used – Set all OFF)
FIG. 4-6 Dip Switches
CN2
SW3
SW2
SW1