Manual

Chapter 2: Specifications
Page 2-4
2.4.1 Micro Tool Specification Table
TOOL TYPE
SERVO
TYPE
FULL SCALE TORQUE
SPEED
RPM
NM KGM KGCM FTLB INLB MAX MIN
MFT-080M10 MNR-8 0.8 0.08 8.0 .59 7.08 1100 1
CONVERSION GUIDE: 1 KGM = 100 KGCM = 9.8 NM = 7.2 FTLB = 86.7 INLB
Tool Assembly Model Number Breakdown
Example: MFT-080M10
MFT: MICRO NR Series Tool
080: .08 Kgm tool capacity (last digit indicates decimal position from left)
M10: Micro Resolver Motor (Model 10)
The tool lists located throughout this manual identify the specifications for the
standard Micro NR tool used with the MICRO NR System. If additional capacity,
information or special needs are required, please contact FEC INC.