Manual

Do not remove the motor
The
tool output spindle may rotate and cause injury.
Do not repair, disassemble, or modify the equipment
Failure to observe
Never operate the eq
or
flammable gases
Keep fingers away from the
ter the equipment is turn
shock.
Wiring,
operation and maintenance work shall be conducted by a
Failure to observe
Turn OFF the power when conducting wiring operation
Failure to observe
Never
damage the cables, apply excess
Never use damaged cables.
Failure to observe
Properly GROUND all Field Ground (
pin on the POWER CORD.
power cord grounded!
Failure to observe
In case of an
abnormal odor, noise, or operation error
and turn OFF the
power
Install a Power shutdown
Failure to observe
When equipment is automatically operated, i
equipment in or
der to stop
Keep away from the equipment
measures are conducted
Failure to observe
Do not remove the motor
s and gear cases of tools
while power is applied.
tool output spindle may rotate and cause injury.
Do not repair, disassemble, or modify the equipment
individual components of the system.
this instruction may cause
injury, electric shock, fire, and malfunction.
Never operate the eq
uipment where it is exposed to water, near a
corrosive
flammable gases
. Failure to observe this instruction may cause
fire.
Keep fingers away from the
connectors while the equipment is turned ON
ter the equipment is turn
ed OFF. Failure to observe
this instruction may cause
operation and maintenance work shall be conducted by a
qualified
this instruction may cause electric shock and injury.
Turn OFF the power when conducting wiring operation
and
maintenance
this instruction may cause electric shock and injury.
damage the cables, apply excess
stress to cables, or squeeze
the cables.
Never use damaged cables.
this instruction may cause electric shock and fire.
Properly GROUND all Field Ground (
FG) Connections and terminals
including the ground
pin on the POWER CORD.
NEVER
operate this equipment without the ground pin on the
power cord grounded!
this instruction may cause electric shock.
abnormal odor, noise, or operation error
occurrence,
stop operation
power
source. Failure to observe
this instruction may cause
Install a Power shutdown
device
in order to ensure the safety of equipment.
this instruction may cause injury.
When equipment is automatically operated, i
nstall an eme
rgency stop circuit
der to stop
operation promptly. Failure to observe this,
may cause
Keep away from the equipment
during
recovery from a temporary blackout
measures are conducted
after restarting the equipment. T
he equipment may
this instruction may cause injury.
Warning
Safety Precautions
while power is applied.
.
individual components of the system.
.
injury, electric shock, fire, and malfunction.
corrosive
atmosphere
fire.
connectors while the equipment is turned ON
and for a while af-
this instruction may cause
electric
qualified
professional.
maintenance
.
the cables.
including the ground
operate this equipment without the ground pin on the
stop operation
immediately
this instruction may cause
injury and fire.
in order to ensure the safety of equipment.
rgency stop circuit
on the outside of
may cause
injury.
recovery from a temporary blackout
, and ensure safety
he equipment may
suddenly restart.