Manual

FEC FUSION Operations Manual
4.5 Connection
Diagram
A basic layout of System
ence drawings can
WARNING:
Follow Lockout/Tagout and other safety precautions when connecting and/or
disconnecting cabling, wiring, and equipment.
The Fusion controller can be connected to various external devices for control and monitoring
the fastening process.
control I/O is required, d
for
external controllers (PLC or PC Control). Serial RS232 or optional Ethernet is available
for resultant fastening data output.
RS232 connection with a computer runnin
FEC FUSION Operations Manual
Chapter 4: System Setup and Wiring (Rev. 2.1)
Page 4-9
Diagram
A basic layout of System
component intercon
nection is shown in Figure 4
ence drawings can
be found throughout this Chapter, and also in Appendix A.
Follow Lockout/Tagout and other safety precautions when connecting and/or
disconnecting cabling, wiring, and equipment.
FIG. 4-5 Connection Diagram
The Fusion controller can be connected to various external devices for control and monitoring
the fastening process.
The system will operate with no connection to any external devices. If
control I/O is required, d
iscrete Inputs / Outputs or optional fie
ldbus connection is
external controllers (PLC or PC Control). Serial RS232 or optional Ethernet is available
for resultant fastening data output.
Additionally, the front panel provides easy access for
RS232 connection with a computer runnin
g the AFC User Console software.
Chapter 4: System Setup and Wiring (Rev. 2.1)
nection is shown in Figure 4
-5. Detailed refer-
be found throughout this Chapter, and also in Appendix A.
Follow Lockout/Tagout and other safety precautions when connecting and/or
The Fusion controller can be connected to various external devices for control and monitoring
The system will operate with no connection to any external devices. If
ldbus connection is
available
external controllers (PLC or PC Control). Serial RS232 or optional Ethernet is available
Additionally, the front panel provides easy access for
g the AFC User Console software.