Manual

Chapter 1: Outline
Page 1-2
1.1 About This operations manual
This manual details the configuration, components, specifications, and the operation of the FUSION Fastening
System.
The following table outlines the contents of each chapter:
Chapter
Item
Contents
Chapter 1 Outline Basic characteristics and requirements of the
FUSION System.
Chapter 2 Specifications General specifications of the FUSION System.
Chapter 3 System Description Description of standard and optional system
components.
Chapter 4 System Setup and Wiring Equipment installation procedure, dimensions,
Input and Output signal descriptions and
requirements for PLC programming.
Chapter 5 Power Up and Initial Checks Preliminary power on and operational tests.
Chapter 6 Fastening Instructions Basic fastening operations and presetting
procedures.
Chapter 7 System Operations Instructions for the input of preset data and
monitoring explanations.
Chapter 8 Maintenance and Inspection Guide for preventive maintenance.
Chapter 9 Troubleshooting Descriptions of fastening rejects, abnormal
operation faults, and corrective actions.