Manual

FUSION Operations Manual Chapter 7: System Operations (Rev.2)
Page 7-13
6) External gear ratio [WORK]-00, [D-No]-04
Used to enter gear ratio for EXTERNAL gearing (0.3 – 3.000)
Default : 1.000 (1:1 gear ratio)
Note: If external gearing is used, be sure to set the proper gear ratio if different than 1:1 or ANGLE
count could be wrong.
7) Tool Type Data number entry [WORK]-0 [D-No]-20.
The tool number is entered into [WORK]-0 [D-No]-20 and must be set correctly to match the
attached tool or an abnormal will result. (Tool Type Error) Enter the Tool Number which cor-
responds to the tool being connected to the CONTROLLER Unit.
Note: When using the AFC software to program the controller, this tool number is automati-
cally set to the tool chosen in the software set-up.
TOOL
NUMBER
TOOL NAME
MAX.
TORQUE
MAX. SPEED
1 Future Use
2 Future Use
3 HFT-060M80-T 6.0Kgfm
4 (HFT-015M50-A) 1.5Kgfm 1090 RPM
5 (HFT-025M80-A) 2.5Kgfm 1218 RPM
6 (HFT-015M80-S) 1.5Kgfm 1895 RPM
7 HFT-060M80-A 6.0Kgfm 446 RPM
8 HFT-130M80-A 13.0Kgfm 203 RPM
9 Future Use
10 (HFT-040M80-L) 4.0Kgfm
11 HFT-040M80-T 4.0Kgfm 694 RPM
12 (HFT-040M80-A) 4.0Kgfm 735 RPM
13 HFT-015M50-A1 1.5Kgfm 1215 RPM
14 HFT-015M50-S1 1.5Kgfm 1665 RPM
15 HFT-025M80-A1 2.5Kgfm 1070 RPM
16 HFT-040M80-A1 4.0Kgfm 648 RPM
17 (HFT-015M80-A) 1.5Kgfm 1215 RPM
18 HFT-040M80-S 4.0Kgfm 694 RPM
19 HFT-080M80-A 8.0Kgfm 330 RPM
20 HFT-015M50-P 1.5Kgfm 1000 RPM
21 HFT-010M50-S1 1.0Kgfm 1800 RPM
22 HFT-025M80-S1 2.5Kgfm 1000 RPM
Note: The list above contains the tool numbers for Standard tools.
Tools in ( ) are no longer used.