User guide

PAGE ２－2
enFORCE Operation Manual
2.1 System Specifications
Power Supply Voltage 180VAC ~ 242VAC, 3 phase, 50/60Hz
Operating Conditions Temperature: 0 ~ 50℃ (32 ~ 122℉)
Humidity: 20-90%, no condensation
Operating Range Duty Cycle less than 60%
Storage Conditions Temperature: -5 ~ 55℃ (23 ~ 131℉)
Humidity: Below 90%, no condensation
Shipping Conditions Temperature: -5 ~ 55℃ (23 ~ 131℉)
Humidity: Below 90%, no condensation
Press Accuracy From 1/2 to full scale - 3σ less than 3% scatter
of target load.
From 1/4 to 1/2 of full scale load - 3σ less than
4% scatter of target load.
Minimum Distance Display 0.01mm (up to 99.99mm), 0.1mm (over
99.99mm)
Distance Control Resolution 0.001mm
Force Transducer Accuracy
±1% (0 – Full Scale)
Linearity of Force Transducer
±0.5% of Full Scale value (maximum)
Operation Method
Load Control / Distance Control
Load/Distance Rate Setting
2 points
Force Needed Motor Used Required SAN Unit Tool Type
Up to 0.2 ton
６０Ｗ ＳＡＮ３－２４Ｓ ＤＰＴ－０２１Ｒ１－＊＊ＦＳ
Up to 0.5 ton
８０Ｗ ＳＡＮ３－２４Ｓ ＤＰＴ－０５１Ｒ２Ａ－＊＊ＦＳ
Up to 0.5 ton
１５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－０５１Ｒ４Ｈ－＊＊ＰＳ
Up to 1.0 ton
２００Ｗ ＳＡＮ３－４０Ｓ ＤＰＴ－１０１Ｒ３－＊＊ＦＳ
Up to 1.0 ton
１５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－１０１Ｒ４Ｈ－＊＊ＰＳ
Up to 1.5 ton
２００Ｗ ＳＡＮ３－４０Ｓ ＤＰＴ－１５１Ｒ３－＊＊ＦＳ
Up to 1.5 ton
１５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－１５１Ｒ４Ｈ－＊＊ＰＳ
Up to 2.0 ton
２００Ｗ ＳＡＮ３－４０Ｓ ＤＰＴ－２０１Ｒ３－＊＊ＦＳ
Up to 2.0 ton
１５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－２０１Ｒ４Ｈ－＊＊ＰＳ
Up to 3.0 ton
１５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－３０１Ｒ４Ｈ－＊＊○Ｓ
Up to 5.0 ton
１５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－５０１Ｒ４Ｈ－＊＊ＦＳ
Up to 5.0 ton
３０００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－５０１Ｒ５Ｂ－＊＊ＰＳ
Up to 7.0 ton
１５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－７０１Ｒ４Ｈ－＊＊ＦＳ
Up to 10.0 ton
３０００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－１０２Ｒ５Ｂ－＊＊○Ｓ
Up to 15.0 ton
３０００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－１５２Ｒ５Ｂ－＊＊○Ｓ
Up to 20.0 ton
３０００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－２０２Ｒ５Ｂ－＊＊○Ｓ
Chapter 2: Specifications