User guide

enFORCE DSP1500 Main Unit Hardware Manual
(Rev. 4.0) PAGE 4 - 2
Chapter 4: Installation & Wiring
4.1 Unit Dimensions
Main Units must be mounted with a minimum clearance of 13mm on each side to allow proper heat
dissipation. Cable connections on the front of the units require 100mm of clearance. Allow a
minimum of 100mm clearance on the bottom of the unit for flash connector hook up when updating
firmware.
Mounting: Top (1) place #8-32 screw
Bottom (2) places #8-32 screw
Weight: 1.4 kg