User guide

AFC1500 Multi-2 Unit Hardware Manual (Rev. 2)
PAGE 4 - 9
Chapter 4: Installation & Wiring
4.6.2 DISPLAY Port
“DISPLAY” port is currently not used in the US Market.
RS-422 Pin Layout (Male)
4.6.3 DATA-OUT (1) Port
“DATA-OUT(1)” is an output port for ASCII fastening data communication to external devices.
Information concerning available data and data format is shown in the following sections.
RS-232 Pin Layout (Male)
1
DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 Not Used
RS-232C DATA-OUT 1 & 2 CABLE
The following cable diagram shows connection for “dumping” data after a fastening cycle. The
output data configured (using the AFC Software) for the DATA-OUT 1 port will be reported
automatically after the fastening cycle ends.
1 TX+
2 TX-
3 RX+
4 RX-
5 GND
6 Not Used
7 Not Used
8 Not Used
9 Not Used
Front View
Front View