Chapter 3: System Description
Chapter 3: System Description AFC1500 Multi-2 Unit Hardware Manual (Rev.2) 3.1 System Block Diagram The diagram below shows how the AFC1500 Multi-2 Unit can be connected to a single unit or combined in a multiple spindle configuration. The use of a Multi-2 Unit provides one set of PLC I/O for controlling multiple spindle fastening operations.
AFC1500 Multi-2 Unit Hardware Manual (Rev.2) Chapter 3: System Description 3.2 Unit Description AFC MULTI – 2 Standard Version The standard version of the Multi-2 unit includes both an RS232 port (PC Port) and Ethernet port (Ethernet U/C Port) for communicating to a computer running the AFC User Console Software.
Chapter 3: System Description AFC1500 Multi-2 Unit Hardware Manual (Rev.2) Multi-2 Unit Panel Description Power On LED Indicates when power is applied to the Multi-2 Unit. Busy LED Lights when the unit is performing a self check, return, fastening operation or is downloading/uploading data to the AFC User Console software package. Accept LED Lights if a fastening cycle or a self check test falls within acceptable parameters.
