User Manual


2.3 Main Unit
{ CPU: 80386-SX 32-Bit microprocessor
{ Optional Math Coprocessor: Intel 387SX or equivalent
{ KEYBOARD/Keypad: Pendant type, 20 keys
{ MONITOR: Standard VGA interface. Liquid Crystal Display (LCD)
(optional)
{ DATA Communication: RS232C Output CH1 RS232C Input CH2
RS422 Port Centronics Parallel Port
{ PRINTER: DOT PRINTER COLOR GRAPHIC
EPSON FX TYPE HP PAINTJET
EPSON VP TYPE EPSON COLOR
{ FLOPPY DISK Drive: FDD1 (standard) 3.5" 1.44MB
FDD2 (optional) 3.5" 1.44MB
{ HARD DISK DRIVE: IDE Interface (size varies dependent upon availability)
{ Power Source: 200~230 VAC +/- 10% 50/60 Hz
{ Power Consumption: 140 Watts
{ Input Current: Below 0.7A
{ In-Rush Current: Below 50A
{ Fastening Control Methods: Torque method
Angle method
Adaptive Yield method
{ Torque rate calculation: Point-to-point method, Max. 3 areas
integrated method, Max. 3 Areas
{ Fastening sequence steps: Maximum 32 steps
{ Fastening preset: Maximum 8 types
{ Fastening sequence: Maximum 8 selections
{ Group synchronization: Maximum 24 groups
{ Powerheads: Maximum 4 heads
{ Spindles: Maximum 24 spindles per main controller Unit (multiple Main
Units may be linked for additional capacity)
Chapter 2: Specifications User Console Version A3.53
Page 2-4