Chapter 2: Specifications Page 2-1
Chapter 2: Specifications 2.1 User Console Version A3.53 System Specifications { Power Supply Voltage P 200~230 VAC ±10%, 3-Phase, 50/60 Hz { Installation Requirement P NEMA 12 enclosure { Range of Operation P Duty cycle within 50% (reference Section 2.2 Duty Cycle Calculation) P Additional specifications will be provided for nutrunners greater than 50 kgm.
Chapter 2: Specifications 2.2 User Console Version A3.53 Duty Cycle Calculation The rated duty cycle for the AFC1200 System is calculated as follows: Tool Rotation Time X 100 = Duty Cycle Percentage (%) Total Cycle Time (Tool Rotation + Tool Waiting) Example: Tool Rotation Time = Total Cycle Time = 3 Seconds 12 Seconds x 100 = 25% Duty Cycle Percentage Duty cycle ratings vary between tools. As a general rule, however, it should not exceed 50%. Refer to the specifications for each tool.
Chapter 2: Specifications 2.3 User Console Version A3.53 Main Unit { CPU: 80386-SX 32-Bit microprocessor { Optional Math Coprocessor: Intel 387SX or equivalent { KEYBOARD/Keypad: Pendant type, 20 keys { MONITOR: Standard VGA interface. Liquid Crystal Display (LCD) (optional) { DATA Communication: RS232C Output CH1 RS422 Port RS232C Input CH2 Centronics Parallel Port { PRINTER: DOT PRINTER COLOR GRAPHIC EPSON FX TYPE EPSON VP TYPE HP PAINTJET EPSON COLOR FDD1 (standard) FDD2 (optional) 3.
Chapter 2: Specifications 2.4 User Console Version A3.53 Axis Unit { AXIS UNIT TYPE TOOL MOTOR TYPE TOOL MOTOR MODEL NUMBER TOOL MOTOR RATING AXIS UNIT PEAK CURRENT AXIS UNIT IN-RUSH CURRENT AXIS UNIT INPUT POWER AXIS-203 M1 W1 AXIS-205 M2 M3 W3 MFA006 BNE006- MFA010 MFA020 BXE020HA2NSA A117 HA2NSA HA2NSA A912 AXIS-210 M4 MFA040 HA1NS 60W 70W 100W 200W 200W 400W .625A .
Chapter 2: Specifications 2.5 User Console Version A3.53 Nutrunner { Fastening accuracy (Torque): From 1/4 ~ full scale torque: 6s Less than 10% { Torque sample rate: Full Scale Torque X 1/1000 { Torque display resolution: 4.5 digit display with floating decimal point. { Fastening accuracy (Angle): Within +1 degree { Angle sample rate: Below 0.036 degrees (dependent upon gear ratio). { Angle display resolution. 0.
Chapter 2: Specifications User Console Version A3.53 2.5.
Chapter 2: Specifications User Console Version A3.
