User guide


4.4 Nutrunner (Tool) Dimensions
Tool dimensions and mounting specifications are critical in determining the design of the powerhead
that will house the tool assemblies. Caution must be taken to ensure that the tool assemblies do not
come in contact with any other assembly. Failure to provide adequate clearance may result in
inaccuracies in the monitoring capability of the system or possibly damage to the tool assembly.
Torque capabilities of each tool assembly are specified to aid in determining tool requirements.
4.4.1 Straight Tool
M
E
A
B
D
F
C
G
H
øI
4-TAP
N/Q
øK
øJ
L
P
ø
O
S
24
T
R
FIG. 4-4-1 Straight Tool
Numbers shown in brackets are in inches. All others shown in millimeters as the standard.
626.5153062553105056561511050502M4-S
525.513255202.522840430.5470.515030302M3-S
425.510204202.521040412.5452.522020202M3-S
425.510204202.516840370.5410.531515152M3-S
425.510204202.518940391.5431.539513132M3-S
424.58164202.518040382.5422.55008801M3-S
424.58164202.514540347.5387.57906601M3-S
424.58164147.518040327.5367.55004401M2-S
323.55124140159302993292504401M1-S
323.55124140159302993295002201M1-S
323.55124140159302993295001101M1-S1
JIHGFEDCBASPEED
(rpm)
TORQUE
(kgm)
DFT-
TYPE
13155611080M1090110807325.4 (1.00)32502M4-S
10125410276M887102767319.0 (.748)25302M3-S
68478062M86880625415.8 (.622)20202M3-S
68478462M66884625415.8 (.622)20152M3-S
5.56478060M66880605415.8 (.622)20132M3-S
56438060M66274545112.7 (.500)16801M3-S
56438060M66274545112.7 (.500)16601M3-S
3.26438060M66274545112.7 (.500)16401M2-S
35365540M4465540389.5 (.374)12401M1-S
35365540M4465540389.5 (.374)12201M1-S
1.95365540M4465540389.5 (.374)12101M1-S1
WEIGHT
(kg)
TSRQTAPPONMLKDFT-
TYPE
Chapter 4: System Setup and Wiring
Page 4-6