User guide


4.2.2 ISA Main Controller Unit
FIG. 4-2-2 ISA Main Controller Unit Dimensions
When mounted, the ISA Main Unit requires minimum clearances of 50 mm surrounding the Unit and
100 mm at the front of the Unit. These clearances are required for cable connections and heat
dissipation.
4.2.3 Axis Controller Unit
FIG. 4-2-3 Axis Controller Unit Dimensions
When mounted, each Axis Unit requires a minimum clearance of 100 mm above, below and in front of
the Unit for cable connections. A minimum clearance of 25 mm is required between each Unit for heat
dissipation.
Chapter 4: System Setup and Wiring
Page 4-4