User guide


AXIS ENABLE4DATA 15
AXIS ENABLE3DATA 14
AXIS ENABLE2DATA 13
AXIS ENABLE1DATA 12
Binary output for enabled Axis Unit. Reads
Bank Select output. Only one (1) Axis can be
enabled to read Axis Bank 0~1 output.
AXIS ENABLE0DATA 11
SPARESPAREDATA 10
AXIS BANK 1DATA 9
Output confirmation of Axis BANK SELECT
0~1 (Pins 2 and 3) input selections.
AXIS BANK 0DATA 8ONON4
DATA 15
DATA 14
DATA 13
DATA12
DATA 11
DATA 10
DATA 9
SPARESPAREDATA 8OFFON3
DATA 15
DATA 14
DATA 13
DATA 12
DATA 11
SPARESPAREDATA 10
It is activated when the current drawn by the
tool results out of the defined limits for
Current Warning
CURRENT WRNDATA 9
Reserved for future use.FILE WARNINGDATA 8ONOFF2
SEQ OUT4DATA 15
SEQ OUT3DATA 14
SEQ OUT2DATA 13
These four outputs indicate that the fastening
sequence has reached a step that has an out
port [OUT] command inserted. Used to
provide sequence operation status out to the
PLC.
SEQ OUT1DATA12
Reserved for future use.PRN BUSYDATA 11
Reserved for future use.H/W WARNINGDATA 10
Reserved for future use.PROGRAMDATA 9
Reserved for future use.SEQUENCE 3DATA 8OFFOFF1
DESCRIPTIONNAME OF
SIGNAL
BANK DATA
PINS 1~8
PLC2
0
PIN 21
PLC1
1
PIN 22
PLC1
BANK
#
PLC2 BANK DATA
BANK
SELECT
INPUT
Chapter 4: System Setup and Wiring
Page 4-24