User guide


HEAD D REJ.DATA 7
HEAD C REJ.DATA 6
HEAD B REJ.DATA 5
These four signals will output when their
designated spindle(s) generate a Reject
condition. Reference Section 7.10 Machine
Configuration.
HEAD A REJ.DATA 4
HEAD D ABN.DATA 3
HEAD C ABN.DATA 2
HEAD B ABN.DATA 1
These four signals will output when their
designated spindle(s) generate an Abnormal
condition. Reference Section 7.10 Machine
Configuration.
HEAD A ABN.DATA 0ON ON4
HEAD D ENDDATA 7
HEAD C ENDDATA 6
HEAD B ENDDATA 5
These four signals will output when their
designated spindle(s) have completed a
fastening. Reference Section 7.10 Machine
Configuration.
HEAD A ENDDATA 4
HEAD D BUSYDATA 3
HEAD C BUSYDATA 2
HEAD B BUSYDATA 1
These four signals will output while their
designated spindle(s) are fastening. Reference
Section 7.10 Machine Configuration.
HEAD A BUSYDATA 0 OFF ON3
DESCRIPTIONNAME OF
SIGNAL
BANK DATA
PINS 23~30
0
PIN 21
1
PIN 22
BANK
#
PLC1 BANK DATA
BANK
SELECT
INPUT
Chapter 4: System Setup and Wiring
Page 4-23