User guide


4.6.3 Axis Controller Unit
WARNING:
Follow Lockout/Tagout and other safety precautions when connecting and
disconnecting cabling, wiring and equipment.
FRAME GROUNDD
200~230 VAC +
10% 50/60Hz 3-PhaseC
200~230 VAC +
10% 50/60Hz 3-PhaseB
200~230 VAC +
10% 50/60Hz 3-PhaseA
DESCRIPTIONPIN NUMBER
FIG. 4-6-3 Axis Unit Power Connector
NOTE: After an Axis Unit is powered down, the power must not be applied again for at least five (5)
seconds. Repeated power up and power down may temporarily disable the Axis Unit. If an
Axis Unit does become disabled, turn the power off for five (5) minutes before making
another attempt to power up.
Chapter 4: System Setup and Wiring