Instruction Manual


2.3 ISA Main Controller Unit Specifications
wCPU: 80486-DX4 32-Bit Microprocessor
(486DX4, 100 MHz, IBM-Compatible)
wKEYBOARD: Pendant Type, 20 Keys
wMONITOR: Standard: VGA Interface
Optional: Liquid Crystal Display (LCD)
wDATA Communication: RS232C Output CH1 RS232C Input CH2
RS422 Port (Option) Centronics
Parallel Port
wPRINTER: DOT matrix COLOR GRAPHIC
EPSON FX TYPE HP PAINTJET
EPSON VP TYPE
wFLOPPY DISK Drive: FDD 3.5" 1.44MB
wHARD DISK DRIVE: IDE Interface (size varies dependent upon availability)
wPower Source: 200~230 VAC ±10%, 50/60 Hz
wPower Consumption: 140 Watts
wInput Current: below 0.7A
wIn-Rush Current: below 50A
wFastening Control Methods: Torque method
Angle method
Adaptive Yield method
wTorque rate calculation: point-to-point method, Maximum 3 areas
integrated method, Maximum 3 Areas
wFastening sequence Steps: Maximum 32 steps
wFastening preset: Maximum 8 types
wFastening sequence: Maximum 8 selectionS
wspindle Quantity: Maximum 24 spindles per ISA Main Controller
wgroup Synchronization: Maximum 24 groups
wpowerhead synchronization: Maximum 4 heads
NOTE: Several ISA Main Controller Units may be linked together to provide a fastening capacity of
more than 24 spindles.
Chapter 2: Specifications
Page 2-4