User guide


9-189.4.1Zero Check Abnormal
9-99.2.5Upload Error
9-249.4.11Tool Type Mismatch Abnormal
9-229.4.7Tool Not Connected Abnormal
9-169.3.8System Configuration Set Abnormal
9-89.2.2Sub Command Error
9-139.3.1Spindle Dual Port Ram Abnormal
9-159.3.6Spindle Communication I/F Abnormal
9-109.2.7Spindle Download Error
9-229.4.8Servo Alarm
9-269.4.15Servo Type Abnormal
9-269.4.14Servo I/F Power Supply Abnormal
9-159.3.5Selected Sequence Does Not Exist
9-119.2.10Run Mode
9-99.2.3Presetting Error
PAGE #SECTION #MONITOR (CRT) DISPLAY "ABNORMAL"
MESSAGE
Chapter 9: Troubleshooting User Console Version A3.53
Page 9-3