User guide


7.8.3 SEQUENCE SELECT
3-1. Move the cursor on the menu bar to the [SEQUENCE SELECT] using the
[←] [→]
keys and depress the
[↵]
key. THe pulldown menu for SEQUENCE SELEct will
appear.
3-2. USIng the
[←] [→]
keys, select the desired Sequence (1-8) and depress the
[↵]
key. THe screen will automatically change to display the STORED DATA COUNT
information for the selected Sequence.
FIG. 7-8-3 STORED DATA sequence select
7.8.4 CLEAR AND PRINT FUNCTIONS
4-1. CLEAR FUNCTIon
4-1a. MOVe the cursor on the menu bar to [CLEAR] using the
[←] [→]
keys and
depress the
[↵]
key. THE pulldown menu for [CYCLE NO. CLEAR] and [STORED
COUNT CLEAR] will appear.
4-1b. USing the
[↑] [↓]
keys, select the item to be cleared and depress the
[↵]
key. THe screen will automatically change to reflect the cleared item reset to (0). TO
clear the STORED DATA COUNT, the spindle number must be set using the
numerical keys.
FIG. 7-8-4-1 stored data count clear function
4-2 PRINT FUNCTIon
4-2a. MOve the cursor on the menu bar to the [PRINT] function using the
[←]
[→]
keys and depress the
[↵]
key.
Chapter 7: System Operation
Page 7-58