Operating Guide

PAGE 10 OF 34
SOUND SYSTEM OPERATING INSTRUCTIONS
15. A 15 AMP circuit is required to operate this
appliance. If the breaker trips when the appliance
is running, you may need to move the appliance to
another location or unplug other appliances that
are on the same circuit.
The sound system control functions can be
accessed in two ways:
- Using the button control panel,
located in the upper left-hand
corner of the fireplace
- Using the multifunction remote
control
The sound system control panel is located at the
top left corner on the front (see Figure 16).
Plug the electric insert to the outlet before
operating the sound system.
Figure 15
Figure 16
15
16
16. Power: Press button to turn Sound system on
or off. When the sound system is first turned on,
the ember is blue.
If OFF, sound system will be restored at the next
power ON.
Note:
*
All functions will be reset when unplugging
the unit;
*
This Power button is red color on Control
panel and Remote control;
*
Power function for sound system on remote
control - Different from same button on the
Control Panel, while operate with the Remote
control, you just need to press the red “AMP”
button to turn Sound system on or off.
Sound System Control Panel