1. Handheld Microphone Transmitter 1 - 2- 6- 3- -8 74-5 1. Microphone Grille & Capsule 2. Display screen 3. On/ Off button 4. Frequency select button 5. AA battery slot 6. Battery level 7. Frequency spot 8. Signal level 2. Mini Receiver 3 - - - 2 1 4- 1. 6.35 mm audio male plug 2. Receiver shell 3. Receiver signal antenna 4. On / Off button 5. Mini usb recharging interface 6.
.System Operations 3.1. Handheld Microphone Transmitter A. Put two AA batteries correctly into battery slot and press the ON/OFF button to turn on. The display screen shows Battery Level, Signal level and Frequency Spot. ! Do remember to take off the battery when finish using. Because battery leakage will seriously damage the microphone circuit which presents serious safety hazards. B.Frequency spot changing. Take off the shell of battery slot, where you will find the frequency select button inside.
3.2. Mini Receiver A. The mini receiver contains a rechargeable lithium battery and a mini USB charging jack. B. The light indicator: Blue:Receiver ON Red: Low Battery Power/ Charging Green:Charging finished. C Audio output. You can plug in any audio equipment that supports 6.35 mm audio plug, or use the converter provided inside the package for your 3.5 mm audio equipment. ! Remember to turn off the receiver before you plug it in your audio equipment. 4.System Parameters 4.1.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
