SDS

Page 7 / 7
Sodium Carbonate, Anhydrous
SDS # : 497-19-8
Revision date: 2015-04-30
Version 5.01
WHMIS Hazard Class D2B - Toxic materials, Eye irritation
Class E : Corrosive to aluminum. Not corrosive to animal skin or carbon steel.
16. OTHER INFORMATION
NFPA
Health Hazards 2
Flammability 0
Instability 0
Special Hazards -
HMIS
Health Hazards 2
Flammability 0
Physical hazard 0
Personal Protection X
NFPA/HMIS Ratings Legend
Severe = 4; Serious = 3; Moderate = 2; Slight = 1; Minimal = 0
Product Certifications
This product meets the chemical testing specifications defined in the Food Chemicals Codex (FCC), 8th Edition.
This product is certified to NSF/ANSI Standard 60 for use in drinking water treatment at the specified maximum use limit. The MUL
(maximum use level) for sodium carbonate, anhydrous is 150 mg/L under NSF/ANSI Standard 60.
Revision date: 2015-04-30
Revision note Minor change
Disclaimer
Tronox Limited believes that the information and recommendations contained herein (including data and statements) are
accurate as of the date hereof. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF
MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, IS MADE CONCERNING THE INFORMATION
PROVIDED HEREIN. The information provided herein relates only to the specified product designated and may not be
applicable where such product is used in combination with any other materials or in any process. Further, since the
conditions and methods of use are beyond the control of Tronox Limited, Tronox Limited expressly disclaims any and all
liability as to any results obtained or arising from any use of the products or reliance on such information.
End of Safety Data Sheet