Product Manual
Table Of Contents
- CHAPTER I PRODUCT INTRODUCTION
- 1.1 INTRODUCTION
- 1.2 F7S HOST STRUCTURE
- 1.3 VCI BOX STRUCTURE
- CHAPTER II HOST ON/OFF AND FUNCTION MENU
- 2.1 HOST CHARGING
- 2.2 BOOTING
- 2.3 SHUTDOWN
- 2.4 INTRODUCTION TO EACH MENU OPTION
- CHAPTER III VEHICLE DIAGNOSIS
- 3.1 PRE-DIAGNOSTIC TECHNICAL REQUIREMENTS
- 3.2 VEHICLE CONNECTION
- 3.3 VEHICLE TYPE SELECTION
- 3.4 DIAGNOSIS AND OTHER HIGH-LEVEL FUNCTION
- 3.5 DIAGNOSIS
- 3.6 SPECIAL FUNCTION
- 3.7 GENERAL OBDII (FOR GASOLINE MODELS)
- 3.8 DEMO ON THE FCAR F7S AND DIAGNOSTIC SOCKET CON
- CHAPTER IV DATA MANAGEMENT
- CHAPTER V REMOTE DIAGNOSIS
- CHAPTER VI REFERENCE
- CHAPTER VII UPDATE
- CHAPTER VIII SETTINGS
- CHAPTER Ⅸ COMPLIANCE INFORMATION
- WARRANTY CLAUSES
FCAR Product Manual
35
Figure 3.6-1 Special Function
The main interface of the adaptive operation is under the menu guide mode. Please read
the screen prompts carefully and operate according to the prompts. The specific selection
of the procedure will vary depending on the model tested. Here we check the general
processes of adaptive operation:
1) Select vehicle type and related configurations;
2) After the program establishes the normal communication with the vehicle ECU and
some functional operations meet certain conditions, select the functional operation
that needs to be performed, shown as in Figure 3.6-2:
3) Carefully read the information on the screen and check the corresponding vehicle
status, strictly follow the menu prompts;
4) After the adaptive operation is completed, the screen will display prompts such as
“Operate successfully” and “Match completely”.