Product Manual
Table Of Contents
- CHAPTER I PRODUCT INTRODUCTION
- 1.1 INTRODUCTION
- 1.2 F7S HOST STRUCTURE
- 1.3 VCI BOX STRUCTURE
- CHAPTER II HOST ON/OFF AND FUNCTION MENU
- 2.1 HOST CHARGING
- 2.2 BOOTING
- 2.3 SHUTDOWN
- 2.4 INTRODUCTION TO EACH MENU OPTION
- CHAPTER III VEHICLE DIAGNOSIS
- 3.1 PRE-DIAGNOSTIC TECHNICAL REQUIREMENTS
- 3.2 VEHICLE CONNECTION
- 3.3 VEHICLE TYPE SELECTION
- 3.4 DIAGNOSIS AND OTHER HIGH-LEVEL FUNCTION
- 3.5 DIAGNOSIS
- 3.6 SPECIAL FUNCTION
- 3.7 GENERAL OBDII (FOR GASOLINE MODELS)
- 3.8 DEMO ON THE FCAR F7S AND DIAGNOSTIC SOCKET CON
- CHAPTER IV DATA MANAGEMENT
- CHAPTER V REMOTE DIAGNOSIS
- CHAPTER VI REFERENCE
- CHAPTER VII UPDATE
- CHAPTER VIII SETTINGS
- CHAPTER Ⅸ COMPLIANCE INFORMATION
- WARRANTY CLAUSES
FCAR Product Manual
30
Data stream waveform
In data flow interface, click any numerical parameter item in the hidden column, select
[Data Flow Waveform] function icon " ", you can view the data flow waveform of
the running parameter, as shown in Figure 3.5.3-2. Select lower right corner " " to
return to the value display state.
Figure 3.5.3-2 Data Stream Waveform
Data stream recording and comparison function
FCAR smart diagnosis system supports the recording and saving of data stream, and it
can be viewed infinitely in [Data Review]. It also supports the comparison function of
data streams. When the vehicle is in good condition, the data stream can be collected and
stored so as to provide a data reference through the data stream comparison function for
the next test or encountering a vehicle with the same model.
How to record data stream
1) Click [Selection] function icon " " in the upper right corner, tick the parameter
items to be recorded in the pop-up window, and select [OK] to return;
2) Select the [Data Stream Recording] function icon " ", enter the stored file name