Product Manual
Table Of Contents
- CHAPTER I PRODUCT INTRODUCTION
- 1.1 INTRODUCTION
- 1.2 F7S HOST STRUCTURE
- 1.3 VCI BOX STRUCTURE
- CHAPTER II HOST ON/OFF AND FUNCTION MENU
- 2.1 HOST CHARGING
- 2.2 BOOTING
- 2.3 SHUTDOWN
- 2.4 INTRODUCTION TO EACH MENU OPTION
- CHAPTER III VEHICLE DIAGNOSIS
- 3.1 PRE-DIAGNOSTIC TECHNICAL REQUIREMENTS
- 3.2 VEHICLE CONNECTION
- 3.3 VEHICLE TYPE SELECTION
- 3.4 DIAGNOSIS AND OTHER HIGH-LEVEL FUNCTION
- 3.5 DIAGNOSIS
- 3.6 SPECIAL FUNCTION
- 3.7 GENERAL OBDII (FOR GASOLINE MODELS)
- 3.8 DEMO ON THE FCAR F7S AND DIAGNOSTIC SOCKET CON
- CHAPTER IV DATA MANAGEMENT
- CHAPTER V REMOTE DIAGNOSIS
- CHAPTER VI REFERENCE
- CHAPTER VII UPDATE
- CHAPTER VIII SETTINGS
- CHAPTER Ⅸ COMPLIANCE INFORMATION
- WARRANTY CLAUSES
FCAR Product Manual
28
Fault code analysis steps:
1) Read and record all fault codes;
2) Erase all fault codes;
3) Simulate the conditions generated by the fault and start a road test;
4) Then read and record the fault code at this time;
5) Distinguish between incidental fault codes (independent fault codes or historical
fault codes) and persistent fault codes (current fault codes or associated fault
codes);
6) Distinguish between the major fault code and the minor fault code associated with
the fault symptom;
7) Distinguish the major fault codes in many fault codes or related fault codes (it may
be the cause of other fault codes);
8) According to the above analysis, you can further detect the sensor represented by
fault code, related circuit state of the actuator or control computer, as well as
accurate position of the fault occurred.
3.5.3 READ LIVE DATA
Select this function, the real-time operating parameters of the selected system module
will be displayed on the screen. Different models or control modules have different data
parameters, as shown in Figure 3.5.3-1.