Product Manual
Table Of Contents
- CHAPTER I PRODUCT INTRODUCTION
- 1.1 INTRODUCTION
- 1.2 F7S HOST STRUCTURE
- 1.3 VCI BOX STRUCTURE
- CHAPTER II HOST ON/OFF AND FUNCTION MENU
- 2.1 HOST CHARGING
- 2.2 BOOTING
- 2.3 SHUTDOWN
- 2.4 INTRODUCTION TO EACH MENU OPTION
- CHAPTER III VEHICLE DIAGNOSIS
- 3.1 PRE-DIAGNOSTIC TECHNICAL REQUIREMENTS
- 3.2 VEHICLE CONNECTION
- 3.3 VEHICLE TYPE SELECTION
- 3.4 DIAGNOSIS AND OTHER HIGH-LEVEL FUNCTION
- 3.5 DIAGNOSIS
- 3.6 SPECIAL FUNCTION
- 3.7 GENERAL OBDII (FOR GASOLINE MODELS)
- 3.8 DEMO ON THE FCAR F7S AND DIAGNOSTIC SOCKET CON
- CHAPTER IV DATA MANAGEMENT
- CHAPTER V REMOTE DIAGNOSIS
- CHAPTER VI REFERENCE
- CHAPTER VII UPDATE
- CHAPTER VIII SETTINGS
- CHAPTER Ⅸ COMPLIANCE INFORMATION
- WARRANTY CLAUSES
FCAR Product Manual
26
One key erasure
One key erase all fault codes in the system
OK
Select any system module and click OK to enter the module
diagnostic interface.
Pause
Click Pause, the program will automatically pause the scan
and display as [Continue]
ESC
Exit Auto Vehicle Selection and return to the last operation
interface
Manual Vehicle Selection: Select this option, the diagnostic program will display all
vehicle control units. Select a control unit, you can enter the diagnostic interface of the
control unit, as shown in Figure 3.5-2. (If the model is not configured, you can’t establish
communication with the vehicle ECU).
3.5-2 Control unit diagnosis interface
Read fault code: Read and show the Fault Code information retrieved from vehicle
system module
Erase fault code: erase fault code and freeze frame data retrieved from vehicle system
module
Live data: Read and show the current system module real-time operational factor, this
option sometimes possibly displayed as “read data stream”