Product Manual
Table Of Contents
- CHAPTER I PRODUCT INTRODUCTION
- 1.1 INTRODUCTION
- 1.2 F7S HOST STRUCTURE
- 1.3 VCI BOX STRUCTURE
- CHAPTER II HOST ON/OFF AND FUNCTION MENU
- 2.1 HOST CHARGING
- 2.2 BOOTING
- 2.3 SHUTDOWN
- 2.4 INTRODUCTION TO EACH MENU OPTION
- CHAPTER III VEHICLE DIAGNOSIS
- 3.1 PRE-DIAGNOSTIC TECHNICAL REQUIREMENTS
- 3.2 VEHICLE CONNECTION
- 3.3 VEHICLE TYPE SELECTION
- 3.4 DIAGNOSIS AND OTHER HIGH-LEVEL FUNCTION
- 3.5 DIAGNOSIS
- 3.6 SPECIAL FUNCTION
- 3.7 GENERAL OBDII (FOR GASOLINE MODELS)
- 3.8 DEMO ON THE FCAR F7S AND DIAGNOSTIC SOCKET CON
- CHAPTER IV DATA MANAGEMENT
- CHAPTER V REMOTE DIAGNOSIS
- CHAPTER VI REFERENCE
- CHAPTER VII UPDATE
- CHAPTER VIII SETTINGS
- CHAPTER Ⅸ COMPLIANCE INFORMATION
- WARRANTY CLAUSES
FCAR Product Manual
25
fault code, erase fault code, read live data, actuation test and so on.
Special function: different selected vehicle types have different special functions and the
displayed function names are slightly different. This option sometimes may be displayed
as special function, maintenance data, maintenance reset or other similar names.
3.5 DIAGNOSIS
After enter [Diagnosis], you have the following two ways to enter the vehicle system
module: Auto Vehicle Selection and Manual Vehicle Selection.
Auto Vehicle Selection: after select the option, the diagnostic program will
automatically scan all the systems of the vehicle under test. Some vehicles also support
reading the global fault code and one-key clearing code function. The following figure
shows the automatic scanning interface:
Figure 3.5-1 Auto Vehicle Selection
The following table shows the function buttons in Auto Vehicle Selection:
Function name
Function description
Global fault code
Click to view the vehicle total system fault code