Product Manual
Table Of Contents
- CHAPTER I PRODUCT INTRODUCTION
- 1.1 INTRODUCTION
- 1.2 F7S HOST STRUCTURE
- 1.3 VCI BOX STRUCTURE
- CHAPTER II HOST ON/OFF AND FUNCTION MENU
- 2.1 HOST CHARGING
- 2.2 BOOTING
- 2.3 SHUTDOWN
- 2.4 INTRODUCTION TO EACH MENU OPTION
- CHAPTER III VEHICLE DIAGNOSIS
- 3.1 PRE-DIAGNOSTIC TECHNICAL REQUIREMENTS
- 3.2 VEHICLE CONNECTION
- 3.3 VEHICLE TYPE SELECTION
- 3.4 DIAGNOSIS AND OTHER HIGH-LEVEL FUNCTION
- 3.5 DIAGNOSIS
- 3.6 SPECIAL FUNCTION
- 3.7 GENERAL OBDII (FOR GASOLINE MODELS)
- 3.8 DEMO ON THE FCAR F7S AND DIAGNOSTIC SOCKET CON
- CHAPTER IV DATA MANAGEMENT
- CHAPTER V REMOTE DIAGNOSIS
- CHAPTER VI REFERENCE
- CHAPTER VII UPDATE
- CHAPTER VIII SETTINGS
- CHAPTER Ⅸ COMPLIANCE INFORMATION
- WARRANTY CLAUSES
FCAR Product Manual
22
The latest "Auto Vehicle Selection" function of FCAR smart diagnostic system can skip
Manual Vehicle Selection, to obtain specific vehicle information directly from the vehicle
ECU, and quickly enter the diagnostic interface after confirmation. At present, this
function supports a few models, subject to the menu displayed. The following is an
example of Lincoln:
1)
Select [LINCOLN] of AMERICA from the vehicle selection interface;
2)
Click [Auto Vehicle Selection] from the vehicle selection, then the diagnostic
program will automatically recognizes vehicle information;
3)
Check the vehicle information carefully and click [OK] to enter the vehicle
diagnosis interface directly.
3.3.3 DIRECT ACCESS TO THE VEHICLE SYSTEM
(FOR GASOLINE MODELS)
If clearly know the cause of the vehicle failure, you only need to enter specific system
module. Currently the supported vehicle electronic control system includes engine
system, anti-lock brake system, and airbag. Here we take Bosch M797 engine system as
an example:
1) Select [ENGINE SYSTEM] under CHINA menu in the vehicle selection interface;
2) Select [Bosch] in the engine electronic control system interface;
3) In the Bosch engine interface [Bosch M797 engine system], the system will
automatically enter the function diagnosis interface.
3.3.4 AUTOMATICALLY SCAN VIN CODE
(FOR GASOLINE MODELS)
Automatic-scanning VIN code of FCAR smart diagnostic system can identify all
CAN-compatible vehicles. With function of automatic VIN code scanning, service
technicians can quickly find the target vehicle type. The operation steps are as follows:
1) Click [VIN] function icon on [Car Selection] and select [AUTO];
2) Click [Start Scan], then the diagnostic instrument starts to scan the VIN code on the