Product Manual
Table Of Contents
- CHAPTER I PRODUCT INTRODUCTION
- 1.1 INTRODUCTION
- 1.2 F7S HOST STRUCTURE
- 1.3 VCI BOX STRUCTURE
- CHAPTER II HOST ON/OFF AND FUNCTION MENU
- 2.1 HOST CHARGING
- 2.2 BOOTING
- 2.3 SHUTDOWN
- 2.4 INTRODUCTION TO EACH MENU OPTION
- CHAPTER III VEHICLE DIAGNOSIS
- 3.1 PRE-DIAGNOSTIC TECHNICAL REQUIREMENTS
- 3.2 VEHICLE CONNECTION
- 3.3 VEHICLE TYPE SELECTION
- 3.4 DIAGNOSIS AND OTHER HIGH-LEVEL FUNCTION
- 3.5 DIAGNOSIS
- 3.6 SPECIAL FUNCTION
- 3.7 GENERAL OBDII (FOR GASOLINE MODELS)
- 3.8 DEMO ON THE FCAR F7S AND DIAGNOSTIC SOCKET CON
- CHAPTER IV DATA MANAGEMENT
- CHAPTER V REMOTE DIAGNOSIS
- CHAPTER VI REFERENCE
- CHAPTER VII UPDATE
- CHAPTER VIII SETTINGS
- CHAPTER Ⅸ COMPLIANCE INFORMATION
- WARRANTY CLAUSES
FCAR Product Manual
14
Recently used
program
Display the list of recently-used program thumbnails
list, click on the program thumbnail to open the
program, and swipe up the program thumbnail to close
the program
Website
information
With internet connected, click it to enter FCAR official
website
CHAPTER III VEHICLE DIAGNOSIS
Through having established data connection with the vehicle's electronic control system
that has been connected to the VCI device, the diagnostic program can read vehicle
diagnostic information, check the data stream, and perform actuation test and other
functions.
To establish good communication between the diagnostic program and the vehicle, you
need to do as below:
1) Connect the VCI box to the vehicle diagnostics socket and supply the power;
2) Establish communication between VCI and F7S host via Bluetooth pairing or USB
data cable;
3) Check VCI connection status in the upper right corner of the screen (see 3.2.2). The
vehicle diagnosis can be performed after the connection.
Vehicle diagnosis:
1) Establish a good communication between the diagnostic program and the vehicle
under test, see 3.2
2) Select vehicle type, see 3.3.
3) Perform vehicle diagnosis by “Auto Scan” all systems of the vehicle or manually
selecting and detecting a designated control unit. For details, see 3.5.
Here we make the detailed instructions.