User's Manual

FCAR FOBD User Manual of Oil Maintenance Tool
15
2) Service reset usually has two ways: manual and automatic.
Manual reset：manual reset by following the screen prompt
Automatic reset：automatic reset by software
a. Select manual reset, further select the model, select [B11-Easta], the interface
as shown in the figure, according to the screen prompt ti manual reset.
Note：
1) The ignition switch is on, don't drive, because the data is changing when you
are driving, so you can't drive when the service is resetting.
2) Operate every step according to the product prompt, don't make mistakes. It's
better to quit the software after 5-10 seconds when the instrument display is
completed, first quit the software, then turn off the ignition switch. After 10
seconds, turn on the ignition switch to see if the service reset is successful.