User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
Oil & Gas Wireless Enabled Monitoring System 51
Installer’s Guide
Selecting the Data Point Frequency
By default, sensor devices acquire and internally store data points every minute,
even though they may only uplink and transmit one set of data points per day.
PocketDataViewer provides access to all or part of these data points based on
the Frequency interval selected from the pull-down list shown below in
Figure 3-33.
Figure 3-33. Data Point Frequency Interval Options.
Once the Serial Number and History Data Range are selected, hit the Get History
button to download the data points and bring up the windows shown in the
following two Sections. Note: the software issues a warning if the number of
data sets requested is greater than 100.