User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
Oil & Gas Wireless Enabled Monitoring System 41
Installer’s Guide
iTLM-1 Distance Calibration
Luna iMonitoring calibrates the iTLM-1 tank level sensor using a known distance
from the sensor to a surface in the lab. To set the distance calibration parameters,
select the Dist Cal tab at the bottom of the screen to access the distance calibration
menu shown in Figure 3-23 below. Enter the correct Slope and Intercept, and
hit the Set Calibration button.
Figure 3-23. i TLM-1 Distance Calibration Menu.