User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
Oil & Gas Wireless Enabled Monitoring System 17
Installer’s Guide
Adding New Devices
Every Luna iMonitoring device has a unique serial number found on the Luna
iMonitoring Serial Number label attached to the device. The software identifies
each device by its unique serial number. The sensor list contains the serial
numbers of the last ten devices accessed by the software. To add a device to
the sensor list, enter the unique serial number of the device in the space provided
and hit the “<” button. If the sensor list already contains ten serial numbers as
in Figure 3-5 below, then the least recently accessed device drops from the sensor
list. To interrogate a sensor already in the list, simply select the proper serial
number from the list and hit the “>” button to copy the serial number into the
Serial Number field. To access a sensor not in the list, type its serial number in
the space provided. The software automatically adds the serial number to the
list when the Configure button is selected. To clear the selected sensor from
the sensor list, hit the Clear button.
Figure 3-5. PocketConfig Main Menu.