User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
Oil & Gas Wireless Enabled Monitoring System 15
Installer’s Guide
Figure 3-3. i CFR Serial Port Selection Menu.
Typically, the CF slot is located on COM2 or higher. Select COM2 from the
Serial Port pull-down list and click OK. If the iCFR is on COM2, the program’s
main menu will open. If the iCFR in not on COM2, the program will return
to the Start menu and wait for another port selection. Try other available
ports until the program finds the iCFR port and opens the main menu.