User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
13
Chapter 3
WEMS Software
The WEMS Software is a multi-purpose, menu-driven program for configuring and
accessing all modules in Luna iMonitoring’s Intelligent Wireless Sensor Suite. Once
properly configured using the WEMS Software, the devices run autonomously
based on the scheduling parameters set in the software. The WEMS Software
also provides in-the-field access to any device. The following sections include
procedures for initializing all WEMS modules, and instructions for interrogating
these devices in the field.
Installing the WEMS Software
Figure 3-1. (a) SD Card; (b) i CFR
The WEMS Software runs on a PocketPC
®
using the SD Card provided by Luna
iMonitoring. The PocketPC
®
communicates with the sensors and iCCUs using the
iCFR also provided by Luna iMonitoring. The user supplies the PocketPC
®
, which
(a) (b)