User's Manual

WEMS Installer’s Guide 46
WEMS Software
Selecting the Data Point Frequency
By default, sensor devices acquire and internally store data points every minute,
even though they may only uplink and transmit one set of data points per day.
PocketDataViewer provides access to all or part of these data points based on
the Frequency interval selected from the pull-down list shown below in Figure
35.
Figure 35. Data Point Frequency Interval Options.
Once the Serial Number and History Data Range are selected, hit the Get
History button to download the data points and bring up the windows shown in
the following two Sections. Note: the software issues a warning if the number
of data sets requested is greater than 100.