User's Manual

WEMS Installer’s Guide 40
WEMS Software
PocketDataViewer
The other software program on the SD Card is PocketDataViewer which
downloads a set of data points from a sensor device to the PocketPC
®
. Figure 33
on page 44 shows the main menu for the program. This program also includes
the same Setup Options and Help About windows as in PocketConfig which are
discussed in the following sections.
Setting the Default ReSync Time
The ReSync Time selected in the setup menu determines how long the software
waits for a response from a device. To access this menu, select the Setup tab
on the main menu, and hit the Options button shown in Figure 29 below.
Figure 29. Accessing the PocketDataViewer Setup Menu.