User's Manual

WEMS Installer’s Guide 26
WEMS Software
Update Flash Menu
The update flash menu permanently updates the firmware in a device
and should only be performed with the approval of Luna iMonitoring.
When firmware updates are needed, Luna iMonitoring will provide firmware
updates along with instructions on the type of devices to be updated. To open
the update flash menu, select the Update tab as shown in Figure 17 below.
Always verify that the proper device is selected for updates. Hit the
Update Flash button to begin the update process. The progress bar shows the
update progress. Always test the operation of the device thoroughly after
performing firmware updates.
Figure 17. Firmware Update Menu.