User's Manual

WEMS Installer’s Guide 11
WEMS Software
4) In the resulting Config tab screen, enable the function Sync to PC by
‘checking’ (D) this parameter. Once Sync to PC is enabled, select the
Set Parameters button and wait for the progress screen to complete.
5) Verify that the setting was accepted by checking the Current Device
Settings window.
iCFR Installation Instructions
The following instructions are to be performed for the iCFR at installation.
1) Install the WEMS Software on the PocketPC
®
to be used with the iCFR
as described in Chapter3, “WEMS Software”.
2) Remove the iCFR packing carton.
3) Insert the iCFR into the Compact Flash Card slot of the PocketPC
®
.
4) The iCFR is now ready for use as described in Chapter3, “WEMS
Software”.