Operation Manual
Table Of Contents
- GARANTIE
- FEHLERVERMEIDEN!
- ALLGEMEINERWARNHINWEIS:
- AKTUALITTS-HINWEIS:
- LIEFERUMFANG
- ANSCHLUSSDESDISPLAYS
- BEDIENUNGDISPLAY
- INSTALLATIONTOUCH-DISPLAYUNTERWINDOWS
- EINSTELLENDERFAYTECHTOUCH-SOFTWARE
- FEHLERVERMEIDEN/FEHLERBEHEBEN
- COMPONENTS:
- DISPLAYOPERATION
- INSTALLATIONOFTHETOUCH-DRIVERUNDERWINDOWS
- SETTINGUPTHEFAYTECHTOUCHSOFTWARE
- TROUBLESHOOTING
- PHYSICALSETUP:
- STARTUP:
- Pleasenote:Afteryouswitchthedisplayon,you
- Displayremainsblack
- Connectionerror:
- Pleasecheckagaintomakesurethatallcablesar
- Resolution/activationerrors:
- Usingtherightresolutionandactivatingthedisp
- Pleasenotethatextendeddesktopsoftenareblack
- Powersupplyerror:
- Ifthedisplayhasnosignalinput,theremightbe
- Stripes/errorsintheimage
- Pixelerror:
- Eachfaytechdisplayhasbeenthoroughlytestedan
- Textishardtoread,picturelooksfuzzy:
- Thedisplayimageisintheoriginalresolution(s
- Stripes/errorsintheimage:
- WhenconnectingthedisplayusingpowerfromaPC'
- imageisupsidedown:
- Press(whenthereisasignal)the+button.This
- 7INCHIP65TOUCHMONITOR
- 8INCHIP65TOUCHMONITOR
- 10INCHIP65TOUCHMONITOR
- 10.4INCHIP65TOUCHMONITOR
- 12.1INCHIP65TOUCHMONITOR
- 15INCHIP65TOUCHMONITOR,HIGHBRIGHTNESS
- KONTAKT/CONTACT

46
4."Setup Type":
Check the box (see the picture on the next page upper left) only if you want to install the
PS/2-Driver. Usually for a USB-touch display, you should NOT select this option. The
PS/2-Driver works smoothly with a PS / 2 mouse but if you do not have a PS / 2 mouse you
should leave this box unchecked to avoid compatibility problems.
5."Setup Type"
We recommend "None" (see the picture upper right) for the calibration setting. A calibration will
be performed every time your PC starts up if you choose "Every system boot up”. If you
choose “Next system boot up” a calibration will be performed on the next system reboot. You
can carry out a calibration at any time after the TouchKit program is installed. (See “Setting up
the faytech Touch software”.) After making your selection on this screen, click “Next”.