BMX 7inch APL SurfaceMount Phase3 07N4200APLBMX Manual faytech 7inch BMX APL SurfaceMount Phase3 – Specifications 1
Table of Contents 1 Mechanical specifications ................................................................................................. 3 2 Technical specifications .................................................................................................... 5 3 Explanation ..................................................................................................................... 11 3.1 Mainboard External I/O ..........................................................................
1 1.
faytech 7inch BMX APL SurfaceMount Phase3 – Specifications 4
2 Technical Speciation Housing Dimension 316.00*179.50*69.
LCD Panel Touch Panel Mainboard: FAY-APL size 7” 16:9 Resolution 1024*600 Luminance Typ. 1000nits Luminance Uniformity 85% Contrast 800:1 Viewing Angle 75/75/70/75 Response Time 10/15 Type PCAP Capacitive Touch Surface Treatment Anti Glare Cover Glass Thickness 1.8mm Surface Hardness 7H transparenc y >85% Touch Controller COB EXC80W60 Touch Driver EETI touch controller / driver http://home.eeti.com.tw/LinuxDriverDownload.html CPU Apollo Lake N4200, (4C @ 2.
I/O Chipset NUVOTON NCT6116D LAN 1 x LAN1 connector (POE LAN RJ45 connector, POE power connect to 2x2 2.
Relay RFID 4G (Optional) （this product don’t has 4G module） Focusing LEN Interface Angle Yoctopuce Auto channel 4x Channel Operating frequency Outer Dimension Interface Support Cards Support system Read distance Output format Brand/Mode l 125kHz, 13.56MHz FOV ：D= 90° USB2.0, support USB3.
Ibeacon UUID Self-setting allowed Transmissio n Power Input Voltage frequency Self-setting allowed External Interface 5V 2.4G 2x USB 3.
Operation Temperatur e Accessories -20~60⁰ 1x 24V/4A Power Supply, cable length=1.5meter 1x AC Cable 1.
1x Wallmount Plate 1x Lock Key Certification 3 FCC To Be Applied Explanation 3.1.
3.2. Device External I/O 3.3. CPU Cooling 4.Function Explantion The product is pre-installed windows system, power on after the normal use. If want to connect the device through Bluetooth, you need to turn on the Bluetooth switch in the system setting option, and search for the device to be paired and the connection.
If want to connect to the wireless network through WiFi, the system has enabled the WiFifunction by default, select the corresponding wireless network to use. There is a card swiping area on the front of the product. You can use the card type supported by this device about 5cm close to the swiping area. 5.FCC compliance statement This device complies with Part 15 of the FCC Rules.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 6. Changelog • 16.04.2022 Nathan Lu created • 12.07.
