7007 SW Cardinal Lane, Ste 105 Tigard, OR 97224 USA 800.329.2225 (+1.503.597.5350) FaxBack.com | info@faxback.com NET SatisFAXtion 9.0 Installation Guide Carrier Edition Last Edited August 15, 2014 Author Duane Appelman Brett Williams Proprietary FaxBack, Inc.
Table of Contents Table of Contents Overview Carrier Edition Recommended System Specs Fax Hardware Installing NET SatisFAXtion The NET SatisFAXtion 9.0 Installation Wizard Server Installation Wizard IP Fax Only HTTPS Trunk Proprietary FaxBack, Inc.
Overview The main server install for NET SatisFAXtion 9.0™ is a straightforward process. Please insure you have a “full download” from our web site, www.faxback.com/software. Please disable all anti-virus, anti-spyware, popup blocking applications and anything that may interfere with installing NET SatisFAXtion or prevent it from running scripts.
Installing NET SatisFAXtion Download: Run the downloaded file. It will prompt for a directory, to which it will then extract the installer. Once the extraction completes, it will open up a file browser window displaying the “NET SatisFAXtion CD Image” folder. Double-click Setup.exe. First, Setup will verify that the server has Microsoft .NET Framework 3.5 SP1 installed. If it does not, Setup will install it. The installation of Microsoft .NET Framework 3.5 SP1 may take a while. The .
Click Next. Setup will display the NET SatisFAXtion License Agreement. Please review it, then click “I accept the license agreement.” Click Next. Setup will ask which directory to install NET SatisFAXtion. It is recommended you accept the default. Proprietary FaxBack, Inc.
Click Next. Setup will then allow you to enable the monitoring service. Monitoring allows the NET SatisFAXtion server to notify an email address of server loads or unloads. This is an option, you may uncheck “Enable Monitoring” to disable it. If you would like to use monitoring, enter a mail server and an email address. CAUTION: the mail server you enter here must either be the server that hosts the email address entered, or be configured to relay mail on behalf of the NET SatisFAXtion server.
Next, Setup will check to see if the server has Microsoft SQL Server 2005 Express or Microsoft SQL Server Desktop Engine. If not, Setup will install Microsoft SQL Server 2005 Express. The installation of Microsoft SQL Server Desktop Engine may take a while. Server Installation Wizard Setup will now launch a wizard to configure your fax ports. This wizard can be accessed again later (for example, to add new fax hardware) from the Start menu under All Programs > NET SatisFAXtion > Re-detect Fax Devices.
Setup will next need to know what types of fax devices you would like to configure NET SatisFAXtion for. You may choose one or more types of devices, as appropriate. If you do not select any devices, the NET SatisFAXtion installation will complete but it will not be able to send or receive any faxes until you run this wizard again from the Start menu under All Programs > NET SatisFAXtion > Re-detect Fax Devices Click Next. Proprietary FaxBack, Inc.
IP Fax Only If you are not configuring an AudioCodes device or other VoIP device or service, please skip to the next step. To configure a new AudioCodes device, select the option “Assign IP Address to New AudioCodes Gateway,” click Next and reboot the AudioCodes device. For other VoIP devices or VoIP service, click the “Show Advanced Settings” option, and enter the required information. Now Setup will detect all selected fax devices.
take a while. Click Next when it becomes available. Setup will now ask you for a Called Subscriber Identification (CSID). A CSID is how your fax server will identify itself to other fax devices. It is also typically printed at the very top of all faxes it sends out. It may be set to anything. Most users will set this to their fax number or their company name. HTTPS Trunk If you are not configuring an HTTPS Trunk, please skip to the next step.
Setup will also give you the option to specify a digit to get an outbound line. For example, if calls go through a PBX phone system that requires a “9” to get an outside line. For more advanced dialing rules, please see the Administration guide about the Validation Editor. Click Next. You will now see a list of all detected ports. You will be given the option of configuring certain ports for inbound faxes only or outbound faxes only. It is generally fine to allow all ports to send and receive.
Click Next. Setup is nearly ready to run NET SatisFAXtion for the first time. Click Finish. Setup will now create the NET SatisFAXtion service. The service must be configured to log on as a Windows user account. Setup will now ask for the Windows user name, password, and domain to use for the service. The account used must have local Administrator permissions and a password. Proprietary FaxBack, Inc.
The window will default to your current user name and domain. It is recommended that you use a local Administrator account. Set the user name to “Administrator,” and the domain the same as this server’s name. Enter the corresponding password. Click OK. You will now see a splash screen as the NET SatisFAXtion service loads. Your installation of NET SatisFAXtion is now complete. Your web browser will now open the NET SatisFAXtion LaunchPad.
This is what the Launchpad looks like after the installation is complete and you’re viewing it from the shortcut. Proprietary FaxBack, Inc.
