Manual

4.2.1.6DotFaxPlugin
rings_before_answer [dword 0–255]: Number of rings before modem accepts call. Default:
1
send_port_count[dword0–65535]:Numberofsendonlyportstoconfigure.
send_receive_port_count[dword0–65535]:Numberofsend/receiveportstoconfigure.
receive_port_count[dword0–65535]:Numberofreceiveonlyportstoconfigure.
csid[string(20)]:TheCSIforreceiveandtheTSIforsend.
4.2.1.7Administration
ConfigurationkeyfortheAdministrationprogram.
BillingCodeManager[string]:PathtoBillingCodeManager.exe.
Reporting[string]:PathtoReports.exe.
Loader
(Default)[string]:Resource.dlloffset.
4.2.1.8Archive
LegacyExportmodule.
Activated[boolean]:Determinesiflegacyexportmoduleisloadedandfunctioning.
4.2.1.9ASCIIPacketServer
AllowMissingFiles [boolean]: This parameter allows you to configure your system to deliver a
fax if ANY of the files requested exist. By default, ALL the requested documents must exist in
orderforapackettobeprocessedandafaxsubmitted.
If AllowMissingFiles is set to 1, the Connector will still send a message even if some of the files  
listed in the packet are missing. If AllowMissingFiles is 0 or not present, the usual behavior  
prevails.
If AllowMissingFiles is 1 and all the files listed in the packet are missing, ASC2CAS will put the  
followingerrorinthefinishedpacket:
[Logging]
FaxStatusNum=2
FaxStatus=Nothingtosend
AppendPageCountToFileName [boolean]: If 1, this setting enables a custom naming
convention (<filename><number_of_pages>.<extension>) applied to the image file received
when in SINGLE_CALL_RECV mode. This is a custom, limited implementation, where it’s
possible for a prior instance of a file results in the file not being deleted, e.g., when the number
ofpagesinanimagechange.
Client[string]:Undocumented.
ProprietaryFaxBack,Inc.2014 190